Examples of all features from TF8040.
The TF8040 samples are made for TwinCAT Build 4026 based systems:
- TwinCAT.Standard.XAE >= v4026.3
- TwinCAT.HMI.Engineering >= v14.1
- TF8040.BuildingAutomation.XAE >= v6.1
To use the samples clone or download the repository. Inside the repository you find the following samples:
Individual settings within the TF8040-Concept-Samples-PLC-Solution must be adapted to the hardware used. The settings affect the project settings and the I/O.
INFO All necessary steps are described in Starting a project. Individual settings that have already been made do not need to be taken into account any further.
To run the HMI, the PLC must be configured and started.
To load the sample project, the TwinCAT 3 HMI Engineering must first be downloaded and installed.
INFO Further information on the required steps can be found in the documentation for the TwinCAT 3 HMI Engineering in the section installation.
Once the PLC is activated and running, the sample solution can be opened.
In order for the HMI samples to be executable, the TC3 HMI server license of the TF2000 must be licensed on the target system.
No further configuration is necessary if the runtime is activated on the PC on which the HMI project is also started.
If not, the configuration must be adjusted. The procedure for this is described in the tutorial Generic HMI.